Siemens SIMOCODE pro User Manual

Description of the blocks
4.4 Block for MMMeas measured value function
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
157
AM – output – available on
analog modules
AM
– AMOut
AmOutE
AM – input 1 – – AMIn1
AMIn1E
AM – input 2 – – AMIn2
AMIn2E
AM – input 3 – – AMIn3
AMIn3E
TM – max. temperature – available on
temperature
modules TM
available on
multifunction
modules MM or
temperature
modules TM
MaxTemp
TM – temperature 1 – TMTemp1
TM – temperature 2 – TMTemp2
TM – temperature 3 – TMTemp3
EM – ground fault current – available on
ground fault
modules EM
available on
multifunction
modules MM or
ground fault
modules EM
EFltCurr
EM – last ground fault trip
current
– ETrpCurr
"X" = Measured value is available, "–" = Measured value is not available.
Additional measured values for SIMOCODE pro PROFINET devices
The measured values depend on the expansion modules used (AM, TM).
Note
Unsupported values are read and displayed as zero.
Table 4- 63 Additional Measured values for SIMOCODE pro PROFINET devices
Measured values SIMOCODE pro V
from E02
Parameter
AM2 – output available on analog modules AM AM2Out
AM2OutE
AM2 – input 1 AM2In1
AM2In1E
AM2 – input 2 AM2In2
AM2In2E
AM2 – input 3 AM2In3
AM2In3E
TM2 – max. temperature available on temperature modules TM MaxTemp2
TM2 – temperature 1 TM2Temp1
TM2 – temperature 2 TM2Temp2
TM2 – temperature 3 TM2Temp3

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English