Siemens SIMOCODE pro User Manual

Description of the blocks
4.7 MMRevDhl motor block
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
219
Status2
Table 4- 105 Status2 – MMRevDhl
Status2
bit
Description
0
MsgLock
1 Show automatic preview in the standard view
2
Automatic preview for forward mode
3
Automatic preview for stop mode
4
Automatic preview for reverse mode
5
Automatic preview for fast forward mode
6
Automatic preview for fast reverse mode
7
Motor is stopped
8
Motor is stopping in forward mode
9
Motor is stopping in reverse mode
10
Motor is stopping in fast forward mode
11
Motor is stopping in fast reverse mode
12
Motor is starting in forward mode
13
Motor running forward
14
Motor is starting in reverse mode
15
Motor is running in reverse mode
16
Motor is starting in fast forward mode
17
Motor is running in fast forward mode
18
Motor is starting in fast reverse mode
19
Motor is running in fast reverse mode
20
No influence on the local command inputs
21
Error on stopping the motor
22 Error in forward mode
23
Error in reverse mode
24 Error in fast forward mode
25
Error in fast reverse mode
26
Show padlocks in block icon
27
"Protect" button activated
28
Hidden bypass signal in Permit Reverse
29
Hidden bypass signal in Interlock Reverse
30
Hidden bypass signal in Protect Reverse
31
MS_RelOp

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English