Introduction
1.2 Booting
HMI Advanced (IM4)
10 Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
1.2.2 System settings
Overview
Under "System settings", settings are made for inquiry windows, file tree display and screen
display in the Machine, Program and Services operating areas.
File display
You can set the file tree display for the Services, Machine and Program operating areas. The
following columns can be selected:
● File type (extension)
● Downloaded
● Length
● Access protection
● Date
● Time
● Enable
● Display levels (branch to directory trees, max. 7)
● Name length (max. 25 characters)
Sorting information
A dialog box is displayed for setting the sorting sequence of one column. The defined
sequence applies when displaying the corresponding window in the Machine, Program and
Services operating areas of the selected column.
You can select from the following sort criteria:
● Without sorting: Sorted in ascending order according to "Name" by default.
● One of the column designations: The sorting sequence runs in ascending or descending
order. Confirm with OK.
The sorting sequence set is shown as an arrow symbol next to the name of the column
selected as the sorting criterion. In HMI-Advanced with an optional mouse, the following
operating options are also available for column sorting:
A click on the column name with the arrow symbol changes the direction and sorts the
information accordingly. A click on another column makes this the sorting criterion. Click
again to change the direction, if necessary, as in (1.). The selection of another sorting
criterion in the operating area changes the sorting criterion for all operating areas (Machine,
Program, Services).
To Next Page
Loading...
Need help?
General
