Online Help (HE1)
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
5
Programming help systems
1
1.1 Overview
Programming help systems
The extendible programming help systems listed below are available on the
PCU 50.3 controller:
• Quick "ASCII" help
• Extended "PDF" help
– Additional help (PDF file) from the quick "ASCII" help
– Additional help on input fields of cycle parameterization screens
– ISO mode help
The functionality and extendibility of these help systems is described in the sections below.
Software
• HMI Advanced
• Adobe Reader 4.x (available free over the Internet/from specialist dealer)
The Adobe Acrobat Reader 4.x software is supplied on the SINUMERIK 840D sl
controller as standard.
• Adobe Acrobat 4.x
You will need the Adobe Acrobat Distiller 4.x software in order to convert documents to
PDF and for editing documents once they are available in this format.
Storage locations of help files
Programming help: F:\DH\CST.DIR\HLP.DIR (may contain HLP, PDF and TXT files)
Alarm/MD help: F:\MMC2\HLP (may contain HLP, PDF and TXT files)
OPI help: F:\HMI_ADV\HLP (may contain HLP, PDF and TXT files)
To Next Page
Loading...
Need help?
General
