Siemens SINUMERIK Commissioning Manual

List of the INI Files
A.9 HEADER.INI
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
283
A.9 HEADER.INI
Overview
User-specific icons and texts are configured in the HEADER.INI file that are output in the
global cross-channel status display (header).
[CondStopIcons]
DefaultIcon=CondWait.bmp ;0 = No wait state
1=CondStop.bmp ; No NC ready
2=CondStop.bmp ; No mode group ready
3=CondStop.bmp ; EMERGENCY STOP active
4=CondStop.bmp ; Alarm with stop active
5=CondStop.bmp ; M0/M1 active
6=CondStop.bmp ; Block in SBL mode terminated
7=CondStop.bmp ; NC stop active
8=CondStop.bmp ; Read-in enable missing
9=CondStop.bmp ; Feed enable missing
10=CondWait.bmp ; Dwell time active
11=CondWait.bmp ; Aux. function acknowledgment missing
12=CondStop.bmp ; Axis enable missing
13=CondWait.bmp ; Exact stop not reached
14=CondWait.bmp ; Waiting for positioning axis
15=CondWait.bmp ; Waiting for spindle
16=CondWait.bmp ; Waiting for other channel
17=CondStop.bmp ; Waiting for feedrate override
18=CondStop.bmp ; Error in NC block
19=CondStop.bmp ; Waiting for external NC blocks
20=CondWait.bmp ; Waiting for synchronized action
21=CondWait.bmp ; Block search active
22=CondStop.bmp ; Spindle enable missing
23=CondStop.bmp ;Axis feed override 0
24=CondWait.bmp ; Waiting for tool change acknowledgment
25=CondWait.bmp ; Gear step change
26=CondWait.bmp ; Waiting for position control
27=CondWait.bmp ; Waiting for thread cut
28=CondWait.bmp ; Reserved
29=CondWait.bmp ; Waiting for punching
30=CondWait.bmp ; Waiting for safe operation
31=CondWait.bmp ;No channel ready
32=CondStop.bmp ; Oscillation active

Siemens SINUMERIK Specifications

General

Brand	Siemens
Model	SINUMERIK
Category	Control Unit
Language	English