List of the INI Files
A.23 SEDITOR.INI
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
317
A.23 SEDITOR.INI
Overview
You can modify the displays in the multi-channel step sequence programming (option) by
making the appropriate settings or specific supplements in this file.
The sections that contain the code [ *User* ] allow the cycles of the machinery construction
OEM and the user to be identified as "steps" and display these. In addition, other details can
be specified.
To configure your own steps, settings can be made in the following sections:
[SyncMarks_User] Expansions to incorporate synchronization marks
[USER_VARIABLES] Variables for channels with synchronization marks
[Old_or_User_Cycles_USER] Expansions for user cycles; any variable names
can be entered here.
[ProgSupport_User] Expansions to incorporate your own cycles
The merge mechanism is used for the settings; this means that with respect to the standard
version of the ini file, only changes and supplements have to be saved in this directories
add_on, oem and user.
Syntax rules
Note the following information regarding your expansions:
;*************************************************************
;The following rules must be used for the sections:
; - [SyncMarks_Siemens]
; - [SyncMarks_User]
; - [Old_or_User_Cycles_Siemens]
; - [Old_or_User_Cycles_USER]
;
;- You can use either *- or ?-statements.
; Do not mix these placeholders:
;
; L1* -> OK
; L1?? -> OK
; L1?1* -> NOT OK !!!
;
;- ? is replaced with numbers from 0 to 9, so the step editor
; will find the following strings:
;
; L1? -> L10, L19, L15, but NOT L1A
; LB?? -> LB23, LB99, LB00, but NOT LB1A or LBd6
;
To Next Page
Loading...
Need help?
General
