Configuring environment
6.2 Creating configuration data
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
6-7
Permissible file names
The file names are defined as follows:
Alsc.txt Contains the language-dependent texts for the Siemens standard cycles
Almc.txt Contains the language-dependent texts for the manufacturer cycles
Aluc.txt Language-dependent user texts
Format of a text entry
Syntax 8xxxx 0 0 "Text"
Description Assignment between text number and text in the file
Parameter xxxx 5000 to 9899 Text identification number range reserved
for users. You must assign unique
numbers.
"text" Text that appears in dialog
Parameters 2 and 3 are separated by blanks and act as control characters for alarm text
output. To ensure that the text format is identical to that of the alarm texts, these two
parameters must always be set to 0.
The following control characters may be inserted in text:
%n Line break
%@x Axis name of axis x (x is the axis number); HMI Embedded sl only
Show axis names (HMI Embedded sl and HMI Advanced):
NC access to corresponding machine data element containing the relevant axis
name; text assembly by means of the string functions it contains.
Examples:
85000 0 0 "Retraction plane"
85001 0 0 "Drilling depth"
85002 0 0 "Pitch"
85003 0 0 "Pocket radius"
To Next Page
Loading...
Need help?
General
