Custom TVT breakpoints 91...120 (3.3.6.9)
Breakpoint 91 (3.3.6.9.1) ... Breakpoint 120 (3.3.6.9.30)
Sets TVT oset for breakpoint on TVT. Shaping points can be raised (positive number) or lowered
(negative number).
Setting Oset -50 t
o 50 dB
Default 0 dB
9.3.4 Peak values (3.4)
Displa
ys peak measured values.
9.3.4.1 Minimum electronics temperature (3.4.1)
Displays minimum electronics temperature value.
9.3.4.2 Maximum electronics temperature (3.4.2)
Displays maximum electronics temperature value.
9.3.4.3 Minimum distance (3.4.3)
Displays minimum distance value. Value may reset when units are changed.
9.3.4.4 Maximum distance (3.4.4)
Displays maximum distance value. Value may reset when units are changed.
9.3.4.5 Minimum echo signal strength (3.4.5)
Displays minimum echo signal strength value.
9.3.4.6 Maximum echo signal strength (3.4.6)
Displays maximum echo signal strength value.
9.3.4.7 Minimum condence (3.4.7)
Displays minimum condence value.
Parameter assignment
9.3Maintenance and diagnostics (3)
SITRANS LR500 series with mA/HART
138 Operating Instructions, 03/2024, A5E51099898-AA
To Next Page
Loading...
Need help?
General
