3.2 Requirements for special applications
Due
to the large number of possible applications, each detail of the described device versions for
each possible scenario during commissioning, operation, maintenance or operation in systems
cannot be considered in the instructions. If you need additional information not covered by
these instructions, contact your local Siemens oce or company representative.
Note
Oper
ation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
3.3 Proper use
NOTICE
Protection from the device may become impaired
The
equipment is to be used only in the manner outlined in this manual, otherwise protection
provided by the device may be impaired.
3.4 Local governing regulations
NOTICE
Installation regulations
Ins
tallation shall only be performed by qualied personnel and in accordance with local
governing regulations.
Safety notes
3.4Local governing regulations
SITRANS LR500 series with mA/HART
22 Operating Instructions, 03/2024, A5E51099898-AA