Siemens SITRANS LR580 - Proper Mounting Procedures

5.1.3.1 Direct sunlight
NOTICE
Direct sunlight
Damag
e to device.
The device can overheat or materials can deteriorate due to UV exposure.
• Protect the device from direct sunlight. Consider use of optional sunshield.
• Make sure that the maximum permissible ambient temperature is not exceeded. Refer to
the information in Technical speci󹪝cations (Page169).
5.1.4 Proper mounting
WARNING
Incorrect mounting at Zone 0
Risk of e
xplosion in hazardous areas.
• Ensure su󹪟cient tightness at the process connection.
• Observe the standard IEC/EN60079-14.
NOTICE
Incorrect mounting
The de
vice can be damaged, destroyed, or its functionality impaired through improper
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are used.
• Mount the device using suitable tools. Refer to the information in Technical speci󹪝cations
(Page169).
Installing/mounting
5.1Basic safety notes
SITRANS LR500 series with mA/HART
38 Operating Instructions, 03/2024, A5E51099898-AA