17
1. AUDIO SYSTEM OPERATION
2
AUDIO SYSTEM
wWhen a list is displayed
When a list is displayed on the screen,
turn the “TUNE/SCROLL” knob to
move the cursor box to select a desired
item from the list, and pressing the knob
will play it. The track that is being played
is highlighted.
1 Press the “AUDIO” button.
” The audio system turns on in the last
mode used.
2 Touch “Source” or press “AUDIO”
button to display the audio source se-
lection screen.
3 Touch a desired audio source.
” If a desired source is not displayed on the
screen, touch or to scroll to
it.
” Touching the “ALL” will change the list
style as follows.
1 Press the “AUDIO” button.
2 Touch .
SWITCHING AUDIO SOURCE
INFORMATION
● You cannot select dimmed screen but-
tons. Connect the audio device before
selecting.
DSP CONTROL
To Next Page
Loading...
Need help?
General
