99
1. SETUP OPERATION
5
SETUP
2 When this screen is displayed, perform
a device discovery from your Bluetooth
device.
3 Input the passcode displayed on the
screen into your Bluetooth device.
” A passcode is not required for SSP
(Secure Simple Pairing) compatible Blue-
tooth
®
phones. Depending on the type of
Bluetooth
®
phone being connected, a
message confirming registration may be
displayed on the Bluetooth
®
phone’s
screen. Respond and operate the Blue-
tooth
®
phone according to the confirma-
tion message.
” If you want to cancel it, touch “Cancel”.
” If the Bluetooth
®
phone to be registered
has a Bluetooth
®
audio function, this can
be registered at the same time.
4 When the connection is completed,
this screen is displayed.
” Once you have registered it, the system
automatically connects to your Bluetooth
®
device every time you start your vehicle.
1 Touch “Remove” to remove your
Bluetooth
®
device from the system.
2 Select the device to remove.
INFORMATION
● For details on device discovery for your
Bluetooth phone, refer to the Bluetooth
phone’s user’s guide.
● When you register your phone,
Bluetooth
®
audio will disconnect.
● If the Bluetooth
®
device has Bluetooth
®
phone and Bluetooth
®
audio functions, it
will register phone and audio simulta-
neously. If an on-screen message
appears, follow the message and regis-
ter either or both Bluetooth
®
phone and/
or Bluetooth
®
audio functions.
REMOVING A Bluetooth
®
DEVICE
INFORMATION
● When you delete a Bluetooth
®
phone,
the phonebook data will be deleted at
the same time.
To Next Page
Loading...
Need help?
General
