Toyota Display Audio system User Manual

103
1. SETUP OPERATION
5
SETUP
” The information displays the following
items.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
1 Touch “Bluetooth* Power”.
2 Touch “On” or “Off”.
3 Touch “Save”.
” In case that the state of “Bluetooth*
Power” is changed from “Off” into “On”,
Bluetooth
®
connection will begin.
” The “Bluetooth* Power” display shows
the following state.
When “Bluetooth* Power” is “On”: The
Bluetooth
®
device is automatically con-
nected when you start your vehicle.
When “Bluetooth* Power” is “Off”: The
Bluetooth
®
device is disconnected, and
the system will not connect to it next time.
” You can select the state of “Bluetooth*
Power”.
On: The automatic connection is turned
on.
Off: The automatic connection is turned
off.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Name Function
“Bluetooth*
Power”
It is available to set wheth-
er registered devices will
be connected automatical-
ly or not.
“Device
Name”
The name in the
Bluetooth
®
network. You
cannot change it.
“Passcode”
The password when you
register your Bluetooth de-
vice in the system. You
can change it.
“Device
Address”
The address peculiar to
the system. You can not
change it.
“Profiles”
The name of the profile
which your Bluetooth
®
de-
vice corresponds to. (For
details of each profile, see
pages 49 and 70.)
“Display
Phone Status”
The Bluetooth
®
phone
connection status. You
can turn it on and off.
“Display
Audio Player
Status”
The portable audio player
connection status. You
can turn it on and off.
” If you want to change the settings, refer
to the following pages.
” When you change the settings, touch
“Save” after changing them.
CHANGING THE Bluetooth
®
POWER

Toyota Display Audio system Specifications

General

Brand	Toyota
Model	Display Audio system
Category	Car Receiver
Language	English