405
3-7. Other interior features
3
Interior and exterior features
Operating HomeLink
®
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator
light should come on.
The HomeLink
®
compatible transceiver in your vehicle continues to send
a signal for up to 20 seconds as long as the button is pressed.
Retraining a HomeLink
®
button
Press and hold the desired HomeLink
®
button. After 20 seconds, the
HomeLink
®
indicator light will start flashing slowly. Keep pressing the
HomeLink
®
button and then follow the “Training the HomeLink
®
(for
U.S. owners)” instructions. (→P. 400)
Erasing the entire HomeLink
®
memory (all three programs)
Press and hold down the 2 out-
side buttons for 10 seconds until
the indicator flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
®
memory.
To Next Page
Loading...
Need help?
General
