404
3-7. Other interior features
■ Training an entry gate (for U.S. owners)/Training a device in
the Canadian market
Place the remote control transmitter 1 to 3 in. (25 to 75 mm)
away from the HomeLink
®
buttons
Keep the HomeLink
®
indicator light in view while training.
Press and hold the selected HomeLink
®
button.
Repeatedly press and release (cycle) one of the buttons on
the remote control transmitter for 2 seconds at a time until
is completed.
When the HomeLink
®
indicator light starts to flash rapidly,
release the buttons on the HomeLink
®
.
Test the HomeLink
®
operation by pressing the newly trained
button. Check to see if the gate/device operates correctly.
Repeat the steps above to train another device for any of the
remaining HomeLink
®
buttons.
■ Training other devices
To train other devices such as home security systems, home door
locks and lighting, contact your Toyota dealer for assistance.
■ Retraining a button
The individual HomeLink
®
buttons cannot be erased but can be
retrained. To retrain a button, follow the “Retraining a HomeLink
®
button” instructions.
To Next Page
Loading...
Need help?
General
