Universal Robots UR3/CB3 User Manual

15.6 Set Time
15.6 Set Time
Set the time and date for the system and configure the display formats for the clock. The clock is
displayed at the top of the Run Program and Program Robot screens. Tapping on it will show the
date briefly. The GUI needs to be restarted for changes to take effect.
Version 3.10
Copyright © 2009–2019 by Universal Robots A/S. All rights reserved.
II-125 CB3

Universal Robots UR3/CB3 Specifications

General

Brand	Universal Robots
Model	UR3/CB3
Category	Robotics
Language	English