Xerox 2510 User Manual

4. (Figure 6): Install the plastic cover over the
oil pads.
5. Reinstall the oil dispense roll assembly.
6. Reinstall the oil dispense assembly.
I
NOTE:
If the costomer indicates that there is
high usage of
film, DO NOTperform
the next
step.
1 7. Prime the wick.
MOVE THE PLASTIC
COVER
EDGE
OF THE EXTRUSION
(FULL LENGTH)
Figure 6. Install the Plastic Cover over the Oil Pads
REP 10.9

Xerox 2510 Specifications

General

Brand	Xerox
Model	2510
Category	Copier
Language	English