Xerox Wide Format 6705 System User Manual

Copy
2
121
2.16 Copy - [Output Format] Screen
2.16.2 Lead & Tail Margins (Adding Margins to Top/Bottom Edges of
Document)
The following describes how to add page margins to the top and bottom edges of the document.
Note

This function works when [Paper Cut Mode] is set to [Synchronized].
Steps
St
1.
Press [Lead & Tail Margins].
2.
Set the desired items.
Lead/Trail
Set the leading and trailing edges in the range of 0 to 999
mm, in 1 mm increments.
2.16.3 Sample Copy (Determining the Optimal Settings Before Running the
Whole Copy Job)
This following describes how to run a sample copy of an area of a document with several settings applied, in order to
determine the optimal settings. Any portion on the document can be specified as the sample area. This sample area
can be printed with a variety of settings such as the enlarge/reduce ratio, density level, and original type, applied.
The sample copy can show a list of effects of nine levels of density, seven types of image quality, or seven levels of
auto background suppression.
Important

The Sample Copy function cannot be used when:
- [Copy Output] is set to [Collated], and [Change Settings] is applied to the next document
- Copy is running in the auto mode
- You are loading paper manually (bypass copying)
- Copy from memory is running
- Interrupt copy is running

When [Original Type] is set to [Printed Original] or [Photograph], the Background Suppression List cannot be
output.
Note

The Color Board & Page Memory for IIT is required to use this feature.

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English