Xerox Wide Format 6705 System User Manual

8
Problem Solving
8.9 Error Messages
260
8.9 Error Messages
This section describes how to solve the problem when an error message appears.
Important

The message displayed may vary depending on each error.
Error Message Cause Remedy
A system error has occurred.
Power off the machine, wait
for the Control Panel to turn
off. Then power the machine
back on.
If this fault persists, call your
System Administrator.
116-360
[Data conversion error]
Scanned data conversion processing failed.

Turn the power switch off and wait for a
while. After the <Main Power> indicator
on the control panel goes out, turn the
power switch on again.
If the message persists, contact your
local Xerox representative.
A system error has occurred.
Power off the machine, wait
for the Control Panel to turn
off. Then power the machine
back on.
If this fault persists, call your
System Administrator.
XXX-XXX
An internal error occurred.

Turn the power switch off and wait for a
while. After the <Main Power> indicator
on the control panel goes out, turn the
power switch on again.
If the message persists, record the
displayed contents [XXX-XXX].
Then, turn the power switch off, and
after the <Main Power> indicator on the
control panel goes out, contact your
local Xerox representative.

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English