3.11 Scan - [Layout Adjustment] Screen
160
3.11.5 Scan Speed (Specifying Scanning Speed)
The following describes how to set slower scanning speed for additional reliability.
1.
Press [Scan Speed].
2.
Select the desired option.
The selectable speeds vary depending on the
selected color mode and scan resolution.
If you have already chosen an option under
[Adjust Color Density], then the scan speed is
fixed to Super Slow (33.8 mm/sec). You cannot
change this setting.
Color
When [Output Color] is set to [Color], you can adjust scan speed as shown in the table below.
Yes: available —: unavailable
Other than full color
When [Output Color] is set to another option than [Color], you can adjust the scan speed as shown in the table
below.
Yes: available —: unavailable
Resolution
Scan Speed
150 dpi 200 dpi 300 dpi 400 dpi 600 dpi
[Medium]
(67.6 mm/sec)
Yes Yes Yes — —
[Super Slow]
(33.8 mm/sec)
Yes Yes Yes Yes Yes
Resolution
Scan Speed
150 dpi 200 dpi 300 dpi 400 dpi 600 dpi
[Super Fast]
(203.2 mm/sec)
Yes Yes Yes — —
[Fast]
(101.6 mm/sec)
Yes Yes Yes Yes Yes
[Slow]
(50.8 mm/sec)
Yes Yes Yes Yes Yes