Xerox Wide Format 6705 System User Manual

3
Scan
3.9 [Multi Send Scan] Screen
148
3.9 [Multi Send Scan] Screen
This section describes how to select functions on the [Multi Send Scan] screen. Use this feature to store scanned data
on computers (servers) registered as a group address, and print them on a printer.
Note

When you select a printer as part of the destinations, TIFF or JPEG files will be transferred to the printer,
regardless of the file format specified under [File Format]. For information on how to select TIFF or JPEG as the
file format to be used, refer to "Multi Send Printer Transfer Format" (p. 321).
Refer

To use the Multi Send Scan feature, you must first set up your network. For information on how to configure
network settings, refer to "Setting Up the Scan to PC Feature" (p. 211).

The destination group address must be registered before running a scan job. For information on how to register a
group address, refer to "Multi Send Address (Group Address)" (p. 206).
The following describes the [Multi Send Scan] screen. Refer to the following subsection:
 Multi Send Address (Specifying the Destination).....................................................................................................................p. 149
Steps
St
1.
On the menu screen, press [Multi Send Scan].
2.
Select the desired function on the [Multi Send Scan]
screen.
Note

The following functions are equivalent to those
displayed on the [Store to Folder] screen. For
information on how to do this, refer to "[Store to
Folder] Screen" (p. 135).

Color Scanning Mode

Resolution

Original Type

Output File Format

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English