327
9.8 Print Service Settings
9.8.2 Other Settings
You can use this feature to configure detailed settings for plot processing for individual data format.
In normal use, leave the factory default settings as they are.
1.
Press [Other Settings].
2.
Set each item as necessary, and click [Close].
VPI - Dotted Line Allocation
Allows you to set the processing method for dotted line
allocation.
Select [RASTERIZER] or [PARSER]. The factory default is
[RASTERIZER].
VPI - Symbol
Select [Mode 1] or [Mode 2]. The factory default is [Mode 1].
VPI - Font Number
Allows you to set the machine to use the fonts specified in data or to force the machine to use the fonts specified
here.
Select from [0] to [41(No)]. The factory default is [0].
VPI - Font Priority
Allows you to set whether to use the font number specified in data.
Select [Jobs] or [Controller]. The factory default is [Jobs].
TIFF - Resizing
Allows you to set the mode of compression and decompression of TIFF data.
Select [PHOTO] or [LINE]. The factory default is [PHOTO].
HPGL - Draw Arc
Allows you to set the drawing method for arcs.
Select [Follow Allocation Command] or [Ignore Allocation Command]. The factory default is [Ignore Allocation
Command].
To Next Page
Loading...
Need help?
General