3.9 [Multi Send Scan] Screen
150
No.1 Pre-Output
If you have selected printers as part of the send destination,
and when you scan multiple documents, this function allows
you to set whether to print scanned images one page after
another.
This function is enabled only for the first set.
The second and subsequent sets will be printed
after you press [Last Original].
Off
Select this not to run a pre-output.
On
Select this to run a pre-output. You can select one printer as the destination for the pre-output.
Edit Print Quantity
If you have selected printers as part of the send destination,
you can specify the number of copies to be printed for
individual printers.
To change the number of copies, press the entry field, and
then set the value by using the numeric keypad or by
pressing [+] or [-] until the desired value is displayed.
You can specify up to 99 for the number of
copies.
4.
Press [Close].
5.
Press [Save].
The machine checks the connection with the destination.
If the machine fails to establish a connection with the destination, an error message is displayed. In that
case, press [Confirm], and verify the settings.
To Next Page
Loading...
Need help?
General