157
3.11 Scan - [Layout Adjustment] Screen
2.
Select the desired option.
Auto Detect
Select this to allow the machine to automatically detect the
document size. Select the size series to detect.
The sizes of special A series used on the
machine can be adjusted using the System
Settings function. For information on how to do
this, refer to "Special Size Setting" (p. 297).
Standard Size
Select either among standard sizes.
When PDF is selected in [File Format], your
setting for the original size may be changed or
an error may occur, depending on the
combination of the ratio and resolution. For
detailed information, refer to "Notes and
Restrictions on the Use of the Scan Feature" (p.
354) in "Notes and Restrictions".
When [Auto Detect] or one of the preset standard sizes is selected, and if you load a document of which length is
wider than that of the standard size, the machine handles the document as shown in the figure below.
A4 Portrait
dimensions
A4 Landscape
dimensions
A4 Landscape
dimensions
Original
Original
Original
50 mm or less
More than 50 mm
- When the length of original is equal to
or less than "the length of the short
edge of a Standard Landscape size
+ 50 mm"
The original is detected as "Standard
Landscape" and the excess area is
ignored.
- When the length of original is more
than "the length of the short edge of a
Standard Landscape size + 50 mm"
The original is detected as "Standard
Portrait" of one size larger than the
original.
- When the length of original is more
than the length of the long edge of
a Standard Portrait size
The original is detected as "Standard
Portrait" and the excess area is ignored.
The original shown in the figure to the left is
detected as "A4 Landscape" and the excess
area (shaded area) is ignored.
The original shown in the figure to the left is
detected as "A4 Portrait" and the excess
area (shaded area) is ignored.
The original shown in the figure to the left is
detected as "A3 Portrait".
Example
Example
Example
To Next Page
Loading...
Need help?
General