Xerox Wide Format 6705 System User Manual

Before Using the Machine
1
59
1.10 Calibrating the Scan Sensor Gap
4.
Press [+] or [-] to set the adjustment value in the range of
-5 to +5 steps.
Important

Each gap is adjusted by the amount equivalent
to the sum of Auto Adjust, Adjust All, and Adjust
By Gap.
Adjust All
Use this option to adjust the scanning speed (document
feed speed of the motor) to calibrate all the gaps.
Adjust By Gap
Use this option to adjust the individual gaps between
scanning sensors (digital calibration).
5.
Press [Save].
0 mm
Gap1
(183 mm)
Gap2
(386 mm)
Gap3
(548 mm)
Gap4
(731 mm)
To move (calibrate) the image of the areas
corresponding to [Gap2] and [Gap4] in the
arrow direction by increasing the scanning
speed, set a positive value in [Adjust All].
0 mm
Gap1
(183 mm)
Gap2
(386 mm)
Gap3
(548 mm)
Gap4
(731 mm)
To move (calibrate) the image of this
area in the arrow direction, set a
positive value in [Gap3].

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English