Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010 39
Connect Power Chapter 3
Initial Startup
The first time you start the system, the terminal goes through its power-up
sequence and launches FactoryTalk View ME Station, the Configuration mode of
the terminal.
You can change the action the terminal takes on startup by choosing Terminal
Settings>Startup Options. You can do one of the following:
• Launch FactoryTalk Machine Edition and run an HMI application that is
configured to run at startup.
• Launch FactoryTalk View Machine Edition and run the configuration
options for the terminal (default, shown above).
• Launch the Windows Explorer desktop.
All PanelView Plus 6 terminals can also be configured to allow desktop access.
Terminals are initially shipped with desktop access disabled. To allow or restrict
desktop access, choose Terminal Settings>Desktop Access.
For more information on changing the start-up option and restricting or allowing
desktop access, refer to Chapter 4
- Configuration Mode.
To Next Page
Loading...
Need help?
General
