Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010 77
Configuration Mode Chapter 4
Change the Time Zone for Terminal Operations
You can view or modify the current time zone that is installed on the terminal.
Time zones are installed as a part of the operating system. Changing the time
zone adjusts the current time and date to match the new time zone.
1. Select Terminal Settings>Time/Date/Regional Settings>Time Zone.
2. Press the up and down cursor buttons to select a time zone.
If the selected time zone supports Daylight Savings, you can press the
Daylight Savings button.
3. Press the Daylight Savings button to enable or disable daylight savings for
the selected time zone.
Daylight Savings is set to Yes for all time zones except for Japanese, which
does not support daylight savings. Daylight savings changes are not
permanently applied until you close the Time Zone dialog.
4. Press the Use Daylight Savings Button to select Yes or No.
5. Press Close when done.
6. Press OK to return to previous dialog box.
Language Default Time Zone
English (GMT -05:00) Eastern Time (US and Canada)
French (GMT +01:00) Brussels, Copenhagen, Madrid, Paris
German (GMT +01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
Japanese (GMT +09:00) Osaka, Sapporo, Tokyo
To Next Page
Loading...
Need help?
General
