70 Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010
Chapter 4 Configuration Mode
Check Integrity of
Application Files
It is recommended that you periodically check the integrity of the FactoryTalk
View .mer application file that is currently loaded in the terminal and the runtime
files. All errors, warnings, and information messages generated by these files are
logged to a file. You can periodically view the log and clear all items from the log.
1. Select Terminal Settings>File Integrity Check.
2. Press either of the Enable buttons to enable or disable file integrity checks.
• Enable Check of the MER
• Enable Check of the Runtime Files
By default, integrity checks are automatically performed on the application
.mer file and runtime files. If you disable either of these functions, the files
will not be checked nor will the log file be updated.
3. Press OK to save changes.
Follow these steps to view the file integrity check log.
1. Press the View Log button from the File Integrity Check dialog.
2. Select an event and press the More Details button to display details for a
specific file check event.
3. Press the Clear All button to clear all details from the log.
4. Press Close to return to previous dialog.
To Next Page
Loading...
Need help?
General
