Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010 59
Configuration Mode Chapter 4
Follow these steps to define a name server address.
1. Select Terminal Settings>Networks and Communications>Network
Connections>Network Adapters.
2. Press a button to enter a name server address.
3. Press OK when done.
View or Change Terminal Device Name
Each terminal has a default device name and description that is used to identify
the terminal on the network. You can view or modify this information.
1. Select Terminal Settings>Networks and Communications>Network
Connections>Device Name.
2. Press the Device Name button to enter or edit the device name.
3. Press the Device Description button to enter a description for the device.
4. Press OK.
Field Description Valid Values
Primary DNS The address of the primary DNS resolver. xxx.xxx.xxx.xxx
Secondary DNS The address of the secondary DNS resolver. xxx.xxx.xxx.xxx
Primary WINS The address of the primary WINS resolver. xxx.xxx.xxx.xxx
Secondary WINS The address of the secondary WINS resolver. xxx.xxx.xxx.xxx
Field Description Valid Values
Device Name
(1)
Unique name that identifies the
terminal to other computers on the
network.
1…15 characters
• A leading character in the range of a through z or
A through Z.
• Remaining characters in the range of a through z,
A through Z, 0…9, or - (hyphen)
Device Description Provides a description of the
terminal. The default is the logic
module catalog number.
50 characters max
(1) Check with your network administrator to determine a valid device name.
To Next Page
Loading...
Need help?
General
