72 Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010
Chapter 4 Configuration Mode
View and Clear the System
Event Log
The System Event Log dialog displays a list of warnings, errors, and events logged
by the terminal. The log provides a time stamp of when each event occurred and
text describing the event. If the event log is full when a new event occurs, the
oldest entry is removed to accommodate the new event.
1. Select Terminal Settings>System Event Log.
2. Select an event and press the More Details button to display log details for
that event.
3. Press the Clear All button to clear all system event logs.
4. Press Close.
To Next Page
Loading...
Need help?
General
