Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010 61
Configuration Mode Chapter 4
2. Press the Source button to choose the storage location of the application or
font file you want to delete.
• Internal Storage - internal flash memory of the terminal
• External Storage 1 - SD card loaded in the card slot of the terminal
• External Storage 2 - USB flash drive connected to a USB host port
3. Select a file from the list.
4. Press the Delete button.
5. Select Yes or No when asked if you want to delete the selected application
or font file from the storage location.
Delete Log Files
You can delete generated log files, alarm history files, and alarm status files from
the System Default location on the terminal.
1. Select Terminal Settings>File Management>Delete Files>Delete Log
Files.
You are asked to confirm the deletion of the files.
Do you want to delete all of the FactoryTalk View ME Station Log Files?
2. Select Yes or No.
Log files not located in the System Default location will not be deleted.
To Next Page
Loading...
Need help?
General
