Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010 81
Configuration Mode Chapter 4
Change the Long Date Format for a Language
Follow these steps to change the long date format used by the selected language.
1. Select Terminal Settings>Time/Date/Regional Settings>Regional
Settings>Long Date Format.
The current date is shown in the selected long date format.
2. Press the Long Date Format button to select a date format.
3. Press OK when done.
Long Date Formats Example
dddd, MMMM, dd, yyyy (default)
dddd is name of week day
MMMM is name of month
dd is two-digit day of month with leading zero
yyyy is four-digit year
Wednesday, September 01, 2010
MMMM dd, yyyy
MMMM is name of month
dd is two-digit day of month with leading zero
yyyy is four-digit year
September 01, 2010
dddd, dd MMMM, yyyy
dddd is name of week day
dd is two-digit day of month with leading zero
MMMM is name of month
yyyy is four-digit year
Wednesday, 01 September, 2010
dd MMMM, yyyy
dd is two-digit day of month with leading zero
MMMM is name of month
yyyy is four-digit year
01 September, 2010
To Next Page
Loading...
Need help?
General
