Version 3.0.1 105 July 2010
MP-20x Telephone Adapter 10. WAN Settings
10 WAN Settings
You can change the WAN mode from its default connection type (Ethernet), using one of
the following methods:
'Quick Setup' screen (Quick Setup menu): use the 'Connection Type' drop-down list.
'Network Connections' screen (Network Connections menu): click the link New
Connection, select the 'Advanced Connection' option, and then choose the
connection type.
10.1 WAN Ethernet
WAN Ethernet is the default mode. WAN Ethernet is used to connect MP-20x to the
network either directly or via an external modem.
¾ To access its properties:
From the sidebar menu, click the Network Connections menu, and in the screen
'Network Connections', click the Edit icon corresponding to the 'WAN Ethernet'
connection name; the screen 'WAN Ethernet Properties' opens.
Figure 10-1: WAN Ethernet Properties
To Next Page
Loading...
Need help?
General
