Version 3.0.1 255 July 2010
MP-20x Telephone Adapter 14. Advanced Settings
2. From the 'Time Zone' drop-down list, select the local time zone. MP-20x can
automatically detect daylight saving setting for selected time zones.
3. In the ‘GMT Offset’ field, enter the GMT offset time.
4. Under the 'Daylight Saving Time', configure the daylight saving settings for your time
zone (if they are not automatically detected):
• Enabled: Select this check box to enable daylight saving time.
• Start: Date and time when daylight saving starts.
• End: Date and time when daylight saving ends.
• Offset: Daylight saving time offset.
5. For the Telephone Adapter to perform an automatic time update, under the 'Automatic
Time Update' section, perform the following:
a. Select the 'Enabled' check box.
b. Select the protocol to be used for time update, by selecting either the 'Time of
Day' or 'Network Time Protocol' option.
c. In the 'Update Every' field, specify how often to perform the update.
d. You can define Time server addresses, by clicking the New Entry link.
14.22 Configuring Users
The 'Users' screen lists the currently defined users and provides a link to add new users.
You may also group users according to your preferences. The "Administrator" is a default
user provided by the system. Administrator Permissions grants permissions to
remotely modify the system settings via the Web-based management or Telnet.
¾ To configure users:
1. In the 'Advanced' screen, click the Users icon; the 'Users' screen appears.
Figure 14-54: Users Screen
To Next Page
Loading...
Need help?
General
