MP-20x Telephone Adapter 116 Document #: LTRT-50609
User's Manual
4. Select the ‘Point-to-Point Tunneling Protocol (PPTP)’ option ,and then click Next; the
screen ‘Point-to-Point Tunneling Protocol (PPTP)’ opens.
Figure 10-11: Point-to-Point Tunneling Protocol (PPTP) Screen
5. Enter the username and password provided by your Internet Service Provider (ISP).
6. Enter the PPTP server host name or IP address provided by your ISP.
7. Click Next; the screen 'Connection Summary' opens.
Figure 10-12: Connection Summary
8. Check the 'Edit the Newly Created Connection' check box if you wish to be routed to
the new connection's configuration screen after clicking Finish.
9. Click Finish to save the settings; the new PPTP connection is added to the network
connections list and is configurable like any other connection.
To Next Page
Loading...
Need help?
General
