Version 3.0.1 117 July 2010
MP-20x Telephone Adapter 10. WAN Settings
10.3.2 General
This section displays the connection's general parameters.
Figure 10-13: General PPTP Settings
Table 10-8: General PPTP Settings
Parameter Description
Schedule
By default, the connection is always active. However, you can configure
scheduler rules (via Advanced>Scheduler Rules) in order to define time
segments during which the connection may be active. Once a scheduler rule(s)
is defined, this field changes to a drop-down list, allowing you to choose
between the available rules.
Network
Select whether the parameters you are configuring relate to a WAN, LAN or
DMZ connection, by selecting the connection type from the drop-down list.
MTU
MTU is the Maximum Transmission Unit. It specifies the largest packet size
permitted for Internet transmission. When set to its default (Automatic), MP-20x
selects the best MTU for your Internet connection. Select 'Automatic by DHCP'
for the DHCP to determine the MTU. If you select 'Manual', it is recommended
to enter a value in the range of 1200 to 1500.
10.3.3 PPP Configuration
Refer to 'PPP Tab' on page 110.
10.3.4 PPP Authentication
Refer to 'PPP Tab' on page 110.
10.3.5 PPP Encryption
Refer to 'PPP Tab' on page 110.
10.3.6 Internet Protocol
Refer to 'Settings Tab' on page 106.
To Next Page
Loading...
Need help?
General
