Version 3.0.1 111 July 2010
MP-20x Telephone Adapter 10. WAN Settings
10.2.2 PPP Tab
The PPT tab displays the PPPoE settings.
¾ To configure the WAN Ethernet - PPPoE properties
In the 'WAN Ethernet Properties' screen, click the PPP tab; the following screen
opens:
Point-to-Point Protocol (PPP) is the most popular method for transporting packets between
the user and the Internet service provider. PPP supports authentication protocols such as
PAP and CHAP, as well as other compression and encryption protocols.
Table 10-4: PPP Configuration Parameter Descriptions
Parameter Description
Service Name
Specify the networking peer's service name, if provided by your ISP.
PPP-on-Demand
Use PPP on demand to initiate the point-to-point protocol session only when
packets are actually sent over the Internet.
Time Between
Reconnect
Attempts
Specify the duration between PPP reconnected attempts, as provided by your
ISP.
To Next Page
Loading...
Need help?
General
