Version 3.0.1 165 July 2010
MP-20x Telephone Adapter 12. Remote MP-20x Telephone Adapter Management
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
Enable
- Enables or disables all lines in this profile, or
places it into a quiescent state:
“Disabled”
“Quiescent”
“Enabled”
On creation, a profile must be in the
Disabled state.
In the Quiescent state, in-progress sessions
remain intact, but no new sessions are
allowed. Support for the Quiescent state in
a MP-20x is optional. If this parameter is set
to “Quiescent” in a MP-20x that does not
support the Quiescent state, it must treat it
the same as the Disabled state.
Name
- String to easily identify the profile instance.
Note: Currently, this is not supported.
NumberOfLines voip/num_of_fxs_lines
Number of instances of Line within this
VoiceProfile.
Table 12-12: InternetGatewayDevice.Services.VoiceService.i.VoiceProfile.i.SIP
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
OutboundProxy voip/
signalling/sip/sip_outbou
nd_proxy/addr
Host name or IP address of the outbound
proxy. If a non-empty value is specified, the
SIP endpoint must send all SIP traffic
(requests and responses) to the host
indicated by this parameter and the port
indicated by the OutboundProxyPort
parameter. This must be done regardless of
the routes discovered using normal SIP
operations, including use of Route headers
initialized from Service-Route and Record-
Route headers previously received. The
OutboundProxy value is not used to
generate the URI placed into the Route
header of any requests.
OutboundProxyPort voip/
signalling/sip/sip_outbou
nd_proxy/proxy
Destination port for connecting to the
outbound proxy. This parameter must be
ignored unless the value of the
OutboundProxy parameter in this object is
non-empty.
ProxyServer voip/signalling/sip/proxy_
address
or
voip/signalling/sip/sip_re
gistrar/addr
Host name or IP address of the SIP proxy
server.
To Next Page
Loading...
Need help?
General
