MP-20x Telephone Adapter 70 Document #: LTRT-50609
User's Manual
7.6 Forwarding Calls to Another Phone
¾ To forward calls to another phone:
1. First configure call forwarding (refer to 'Configuring Services Parameters' on page 54)
2. Pick up the phone.
3. Make sure that you can hear a dial tone
4. Dial the call forward key sequence, for example, *32; you'll hear a dial tone.
5. Dial the number of the phone to which you want calls forwarded; you'll hear a stutter
tone (refer to 'Configuring Services Parameters' on page 54).
6. Repl
ace the receiver; from now on, all incoming calls are forwarded. Every time you
pick up this receiver you'll hear the stutter tone for the length of time you configured for
parameter 'Stutter Tone Duration'.
¾ To deactivate calls forwarding:
1. Pick up the phone; you'll hear a stutter tone.
2. Dial the call forward key sequence.
3. Replace the receiver.
4. To make sure you've de-activated, pick up the phone again; you should hear a regular
dial tone and not the stutter tone.
Note: The Call Forward feature is functional only when MP-20x is registered to a
proxy.
To Next Page
Loading...
Need help?
General
