MP-20x Telephone Adapter 200 Document #: LTRT-50609
User's Manual
• Accept Packet: Allow access to packets that match the source and destination
IP addresses and service ports defined in 'Matching'. The data transfer session is
not handled using Stateful Packet Inspection (SPI), meaning that other packets
that match this rule are not automatically allowed access. For example, this can
useful when creating rules that allow broadcasting.
7. Under the section 'Logging', select the parameter 'Log Packets Matched By This Rule'
to log the first packet from a connection that was matched by this rule.
8. By default, the 'Schedule' rule is always active. However, you can configure scheduler
rules to define time segments during which the rule may be active.
9. Click OK to save the settings.
13.10 Security Log
The Security log displays a list of firewall-related events, including attempts to establish
inbound and outbound connections, attempts to authenticate at an administrative interface
(Web-based management or Telnet terminal), firewall configuration and system start-up.
¾ To view the Security Log:
1. From the sidebar menu, click the Security menu, and in the screen 'Security', click the
Log tab; the screen 'Log' opens.
Figure 13-30: Security Log
To Next Page
Loading...
Need help?
General
