Version 3.0.1 243 July 2010
MP-20x Telephone Adapter 14. Advanced Settings
14.14 Regional Settings
The behavior and parameters of analog telephones lines vary between countries. The set
of Call Progress Tones, the protocol used for caller ID and the analog line impedance are
all location-specific. MP-20x enables users to select the country they reside in and MP-20x
automatically selects the correct regional settings.
¾ To select your present location:
1. In the 'Advanced' screen, click the Regional Settings icon; the 'Regional
Settings' screen opens.
2. Select the country from the drop-down list. If your current location is not listed, contact
your Service Provider.
Figure 14-43: Regional Settings
14.15 Remote Administration
It is possible to access and control MP-20x not only from within the home network, but also
from the Internet. This allows you to view or change settings while travelling. It also
enables you to allow your ISP to change settings or help you trouble-shoot functionality or
communication issues from a remote location.
Remote access to MP-20x is blocked by default to ensure the security of your home
network. However, remote access is supported by the following services, and you may use
the 'Remote Access Configuration' screen to selectively enable these services if they are
needed.
To Next Page
Loading...
Need help?
General
