MP-20x Telephone Adapter 234 Document #: LTRT-50609
User's Manual
14.7.3 DHCP Connections
¾ To view a list of computers currently recognized by the DHCP server:
1. Open the screen 'IP Address Distribution'.
2. Click the Connection List button; the 'DHCP Connections' screen opens.
Figure 14-30: Advanced - IP Address Distribution - Connection List
¾ To define a new connection with a fixed IP address:
1. Click the link New Static Connection; the screen 'DHCP Connection Settings' opens.
Figure 14-31: Advanced - IP Address Distribution - Connection List - New Static Connection
2. In the 'Host Name' field, enter a host name for this connection.
3. In the 'IP Address' field, enter the fixed IP address to be assigned to the computer.
4. In the 'MAC Address' field, enter the MAC address of the computer's network card.
Note: A device's fixed IP address is actually assigned to the specific network card's
(NIC) MAC address installed on the LAN computer. If you replace this network
card then you must update the device's entry in the DHCP Connections list
with the new network card's MAC address.
5. Click OK to save the settings; the 'DHCP Connections' screen reappears displaying
the defined static connection. This connection can be edited or deleted using the
standard 'Action' icons.
To Next Page
Loading...
Need help?
General
