MP-20x Telephone Adapter 28 Document #: LTRT-50609
User's Manual
3.2.2.1.3 Point-to-Point Protocol over Ethernet (PPPoE)
¾ To configure PPPoE connection:
1. From the 'Connection Type' drop-down list, select 'Point-to-point protocol over
Ethernet (PPPoE)'.
Figure 3-7: Internet Connection - PPPoE
2. Your ISP should provide you with the following information:
• Login user name
• Login password
3.2.2.1.4 Point-to-Point Tunneling Protocol (PPTP)
¾ To configure PPTP connection:
1. From the 'Connection Type' drop-down list, select 'Point-to-Point Tunneling Protocol
(PPTP)'.
Figure 3-8: Internet Connection - Point-to-Point Tunneling Protocol
2. Your ISP should provide you with the following information:
• PPTP Server Host Name or IP Address
• Login user name
• Login password
To Next Page
Loading...
Need help?
General
