Brother PE-Design 6.0 User Manual

112
Layout & Editing Inputting Images and Embroidery Patterns
4. Click Select to choose the selected device
and to close the dialog box.
b Memo:
To quit the operation and close the dialog
box, click Cancel .
5. Click Image, then Input, then from TWAIN
device.
→ The driver interface for the device select-
ed in the Select Source dialog box ap-
pears.
6. Specify the necessary settings for importing
an image, and then import the image.
→ When the image transfer between the
scanner (or other device) and the driver is
completed, the imported image will be
pasted into the Design Page at its original
size.
b Memo:
• If the image currently displayed in the
Design Page has not yet been saved, you
will be asked whether you want to save it.
• To display, hide, or display a faded copy of
the image that remains in the work area,
click
Image , then Display Image , and
then click the desired display setting.
• To display the original image, click
On .
• To display a faded copy of the image,
click
Faded .
• To hide the original image, click
Off .
Creating a portrait image
Combine images of facial features provided with the
application to create an original portrait image.
1. Click Image, then Input, then from Portrait.
→ The Portrait Properties dialog box ap-
pears.
2. From the Facial Feature selector, select the
overall contour (appearance) of the portrait
(for example, narrow, wide, or child-like)
b Memo:
The preview area shows the setting changes
that you make.
3. From the Part selector, select the part of the
portrait to be changed.
b Memo:
The part of the portrait to be changed can
also be selected by clicking it in the preview
area.
4. Move the Part Variation slider to select the
desired part variation.
b Memo:
• To change both sides of a part together,
such as the eyes or ears, select the
Change Both Left and Right check box.
• The selected part variation is shown in the
sample image.
• To display all variations of the selected
part, click .
a Note:
For information on using the driver interface,
refer to the help manual for that interface, or
contact the manufacturer of the interface.
a Note:
Only one image can be added to the work
area. If you try to display a different image, it
will replace the previous one.
PeDesignV6Eng.book Page 112 Thursday, July 8, 2004 11:59 AM

Brother PE-Design 6.0 Specifications

General

Brand	Brother
Model	PE-Design 6.0
Category	Software
Language	English