© Cesab 8 – 3 T Code(s): 841, 842, 843
Repair manual: Troubleshooting Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
8.4 Troubleshooting methods
8.4.1 General initial troubleshooting
Begin the
troubleshooting
Are the symptoms
mentioned in the
troubleshooting chart?
Collect as much
information as possible
about the problem
Identify all parts that may
have caused the
problem. Use the wiring
chart if needed
Was an error code
displayed?
What is the problem?
When the error is
localized, see the
instructions in the
section for procedures
When did the problem
occur?
Which functions are
affected?
Where at the place of
work did the problem
occur?
Follow the instructions in
the troubleshooting
chart
Follow the instructions in
the chapter
Troubleshooting
Select and prioritize the
most likely causes
Eliminate improbable
errors
What conditions
triggered the problem?
Yes
Yes
No
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
