© Cesab 8 – 46 T Code(s): 841, 842, 843
Repair manual: Troubleshooting Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
8.8.1 The truck cannot be driven.
Symptom Influencing elements Possible cause
Mechanical brake cannot
be applied.
Sensor [B60] • Sensor in wrong position or
disrupted by metal
• Defective sensor
Tiller arm handle always "On" in
travel mode
Damaged wiring harness or
incorrect plus/minus current
supply
Motor control, input [T1:95]. Motor control defective
Mechanical brake cannot
be released.
Sensor [B60] • Sensor in wrong position or
cannot be normally actuated
• Defective sensor
• Break in sensor wiring
harness.
Motor control, input [T1:95]
Motor control, output [T1:90]
Motor control defective
Corrosion Brake has seized due to
corrosion
Truck cannot travel after
start-up although tiller arm
handle was in raised
position.
Sensor [B60] • Sensor in wrong position and
affected by metal
• Defective sensor
Tiller arm handle always "On" in
travel mode
Damaged wiring harness or
incorrect plus/minus current
supply
Motor control, input [T1:95]. Motor control defective.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
