CESAB S214L - 5.1.4 Connection to logged-in operator; Description of operator parameters; Parameters 3 and 4 - Acceleration;Deceleration

© Cesab 5 – 4 T Code(s): 841, 842, 843
Repair manual: Parameters Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
5.1.4 Connection to logged-in operator
The operator parameters can be adjusted individually to the available log-in
profiles. The parameter’s connection to the operator is done by a combination
of operator and parameter numbers where the single digit always
corresponds to the parameter.
Description of operator parameters
Parameters 3 and 4 – Acceleration/Deceleration
These two parameters can be used to get a smoother acceleration/
deceleration where the application or operator profile so requires.
#3 - Acceleration
The lower the parameter value, the more time is needed to accelerate to the
maximum speed.
#4 - Deceleration
Defines plug braking force when speed control [L1] returns to the neutral
position. The lower the value of parameter, the longer it takes to reduce
speed.
Operator
profile
Parameter
range
1 1 – 7
2 11 – 17
3 21 – 27
4 31 – 37
5 41 – 47
6 51 – 57
7 61 – 67
8 71 – 77
9 81 – 87
10 91 – 97
Par. Description Min.
Defa
ult
Max.
Incre
ment
Unit
3 Acceleration 10 80 100 5 %
4 Deceleration 10 90 100 5 %
https://www.forkliftpdfmanuals.com/