© Cesab 4 – 1 T Code(s): 841, 842, 843
Repair manual: Operation and connection sequencesModel(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
4. Operation and connection sequences
This section provides a basic description of the main functions of the truck.
The terms below are used in the description of the truck’s main functions.
• Event – Use of one of the truck's main functions is referred to as an event.
• Prior event – Indicates an event which must have taken place immediately
before the current event in order for the latter to be performed correctly.
• Action(s) – An action that the driver must perform in order for an event to
happen.
• Influencing elements – Conditions that must be fulfilled in order for an
event to happen. Certain parameter settings may also affect the outcome
of the event.
• Resulting conditions – Describe the key events that can be checked in
order to confirm a function.
Note that resulting conditions indicate what is assumed to occur when there
is no error state.
Text within square brackets [ ] refer to the electrical component names in the
truck's electrical diagram.
{High} means ˜ 24 V and {low} means ˜ 0 V unless otherwise specified.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
