© Cesab 7 – 2 T Code(s): 841, 842, 843
Repair manual: Maintenance Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
7.2.3 Degreasing agents
When using degreasing agents, only environmentally-friendly cold
degreasing agents may be used, such as those that are designed for general
vehicle cleaning and do not damage paintwork, plastic components, cables,
hydraulic hoses or decals.
7.2.4 Cleaning the exterior
• Remove rubbish, etc. from the wheels daily
• Degreasing agents can be used as needed, in line with the previous
section.
• Rinse off loose grime using tepid water.
Note:
Seizing, corrosion.
Risk of damage to mechanical parts.
Once washed, the truck should be lubricated as set out in the maintenance
instructions.
7.2.5 Cleaning the chain
We recommend you to replace a chain that is very dirty.
Dirty chains should be cleaned before they are lubricated, e.g. by washing
with solvent such as diesel or petrol.
The chain should be blown dry using compressed air and lubricated directly
after cleaning.
Note:
Exercise care with degreasing agents as these can contain abrasives.
7.2.6 Cleaning the motor compartment
• Cover electric motors, connectors and valves prior to washing.
Note:
Risk of short circuiting.
Risk of damage to the electrical system.
Electrical components must never be cleaned using high-pressure washing
equipment.
• Clean the motor compartment using a well-known degreasing agent,
diluted to a suitable concentration
• Rinse off loose grime using tepid water.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
