© Cesab 1 – 1 T Code(s): 841, 842, 843
Repair manual: Contents Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
1. Contents
2. General introduction...................................................................................... 2–1
2.1 How to use this manual ............................................................................... 2–1
2.2 Warning levels and symbols........................................................................ 2–2
2.3 Pictograms................................................................................................... 2–3
3. General safety rules....................................................................................... 3–1
3.1 Work safety.................................................................................................. 3–1
3.2 Electrical system.......................................................................................... 3–3
3.3 Safe lifting.................................................................................................... 3–4
3.4 Truck modifications...................................................................................... 3–5
4. Operation and connection sequences......................................................... 4–1
Symbols on keypad and display 4–2
4.1 Battery is connected.................................................................................... 4–3
4.2 Login via keypad.......................................................................................... 4–3
4.3 Tiller arm lowered for driving ....................................................................... 4–4
4.4 Driving in fork direction ................................................................................ 4–4
4.5 Driving in the drive wheel direction.............................................................. 4–5
4.6 Neutral position braking............................................................................... 4–5
4.7 Reverse braking .......................................................................................... 4–6
4.8 Mechanical braking...................................................................................... 4–6
4.9 Emergency reversal..................................................................................... 4–7
4.10 Fork lifting .................................................................................................. 4–7
4.11 Fork lifting (S210) ...................................................................................... 4–8
4.12 Support arm lift (S212L, 214L, S220D) ..................................................... 4–8
4.13 Fork lowering ............................................................................................. 4–9
4.14 Support arm lowering (S212L, 214L, S220D)............................................ 4–9
4.15 Click-2-Creep........................................................................................... 4–10
4.16 Turtle function (option)............................................................................. 4–10
5. Parameters...................................................................................................... 5–1
5.1 General........................................................................................................ 5–1
5.1.1 Show/change parameters .............................................................. 5–2
5.1.2 Operator parameters...................................................................... 5–3
5.1.3 Overview ........................................................................................ 5–3
5.1.4 Connection to logged-in operator................................................... 5–4
Description of operator parameters 5–4
Parameters 3 and 4 – Acceleration/Deceleration 5–4
Parameters 6 and 7 – Maximum travel speed 5–5
5.2 General service parameters ........................................................................ 5–6
5.2.1 Overview ........................................................................................ 5–6
5.2.2 Description ..................................................................................... 5–7
Parameter 101/104 – Service/Log-out 5–7
Parameter 102 - Operator access 5–7
Parameter 103 - Start-up display 5–8
Parameter 105/106 - Collision sensor sensitivity for X/Y (Optional) 5–9
Parameter 107 – Battery size 5–10
Table applicable to P214, 216, 218, 220 5–11
Table concerning P225 5–12
Table concerning S208L, 210, 212S, 212L, 212, 214L, 214, 220D 5–13
Verifying parameter settings for freely ventilated batteries
(lead-acid batteries) 5–14
Verifying the parameter setting for valve-regulated batteries
(Exide) 5–14
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
